Knowledgebase
Why does the machine not move the correct distance?
Posted by Jim Dingus on 26 June 2015 02:16 PM
The most likely causes are:

 

  • The Steps Per Unit value for the axis is incorrect.
  • The motor for the axis is improperly tuned (acceleration and/or velocity are too high) which causes motor stalling and lost steps.
  • There is an electrical problem between the controller and the drive.
  • There is a mechanical issue such as backlash or slippage.
(2 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: