I Agree 0 active Feature Request Mach4 Lathe M6 Hello, my name is Peter. This is Mach4 version 4.2.0.5036. I need help with an M6 macro for an 8-station tool turret on a lathe. The homing is working so far, but the program isn't setting tool 1 in the tool display and the appropriate offset. It's a pneumatic tool turret with 8 tools at a 45° angle. A homing switch is installed that defines tool position 1 after the homing. There's also a pressure switch installed that monitors the turret extension. Can anyone give me tips or help me create the M6 macro? Peter Mehner 0 Comments
LINKS: Software Downloads----Terms and Conditions----MachSupport Account Login----MachSupport Forum----Buy Mach----About Us
Hello, my name is Peter.
This is Mach4 version 4.2.0.5036.
I need help with an M6 macro for an 8-station tool turret on a lathe.
The homing is working so far, but the program isn't setting tool 1 in the tool display and the appropriate offset.
It's a pneumatic tool turret with 8 tools at a 45° angle. A homing switch is installed that defines tool position 1 after the homing.
There's also a pressure switch installed that monitors the turret extension.
Can anyone give me tips or help me create the M6 macro?